THUMPER KIT DIY – Solder It Yourself 100% Copper for your Regular Mouth Mason Jar

Description

Once you have completed the soldering all you need to do is attach the in flow, (long tube) to your still, and attach the out flow, short tube to your condenser and you have successfully raised the percent ABV by around 50%. This is why it is referred to sometimes as a “doubler.”  Common methods of attachment are to solder or flex joint it to your rig or just rig with some of our 1/2″ silicone tubing.  (See Other Items)

INSTALLATION NOTE:  Measure the length of the dip tube that goes down to the bottom of the Mason so as to fit your jar.  You will need to slide it up and down or even shorten it so the lid will screw down tight with the tip of the dip down near the bottom.