Thickwall USA FDA Approved HIGH TEMP SILICONE TUBING 1/2″ .500 ID .750 OD Tube for Home Brewing Kettle Hose PER FOOT

$2.80

Here’s ONE FOOT of NSF SILICONE high temp FDA APPROVED home brewery HOT WORT transfer tubing sold by the foot.  If you need 5 feet purchase quantity 5 of this item and we will send you a five foot section.  You get one cut with every order!  Your footage will arrive in one continuous piece (Up to 100′)
This is the perfect MADE IN USA component tubing for connecting and plumbing Chugger, Anvil, and Blichmann pumps, brew kettle spigots, hot water sparge lines, and all other homebrewing applications where high temperature tubing is required.  Our tubing is Made in USA, FDA food safe, and fully NSF approved for food service use.   Fits 3/8″ or 12mm barbed fittings well and has a 1/8″ thick wall.  Tubing is translucent natural color and you can see the flow.  Also available in 3/8″

990 in stock

SKU: 231844902911 Categories: , ,

Description

This high quality tubing is sourced from commercial brewing suppliers and is made from FDA sanctioned materials.  It is unrivaled in its ability to resist extreme temperature variations from minus 100°F up to 500°.  Usual operating temp is 280 degrees F with a max of 350 degrees F.  This tubing is resilient, stretchable, and resistant to compression.  It is odorless, tasteless, and inert.  This is the same material formerly recommended for implantation in human females.  “Silicone Implants” are no longer considered safe.  Apparently there is potential for leakage when squeezed.   Good electrical and weatherability properties.  Resists U.V., ozone, gases, and moisture so it should last a long time in your home brew setup.   Certified by the National Sanitation Foundation (NSF-51) for food service equipment and materials.

  • 1/2″ inner diameter, 3/4″ outer diameter tube that can stretch to fit over barbs up to 14mm in diameter.
  • Highest grade, platinum cured, maximum transparency, SHORE-A #60 hardness – a bit stiffer than our smaller tubing on purpose to prevent collapse. Silicone stretches and does not kink/collapse.
  • Can hold a partial vacuum (about 0.5 atm) without collapse.
  • UV resistant; does not deteriorate outdoors. Extremely durable.
  • Insulates extreme heat and cold, works from -100°F to +500°F.
  • Guaranteed to arrive fresh and springy, without creases. BPA and lead free; food safe, medical grade. Made in U.S.A
  • Widely used for homebrew hot wort lines, pumps, chillers, wine making, milk, food handling, and processing.

Additional information

Weight 16 oz
Dimensions 6 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “Thickwall USA FDA Approved HIGH TEMP SILICONE TUBING 1/2″ .500 ID .750 OD Tube for Home Brewing Kettle Hose PER FOOT”

Your email address will not be published. Required fields are marked *

*