STRAIGHT HOSE BARB BARBED NIPPLE 1/2 Male NPT to 20mm (~7/8) Barb to fit ~3/4″ ID Tubing for Brew Kettle Ball Valve 304 Stainless

$5.95

Here’s the 304 Stainless Steel 1/2 inch NPT male thread to 7/8″ Barb (20mm) Barb pipe fitting you need to go from your 1/2″ NPT female ball valve port to 3/4″ or 7/8″ vinyl or high temp silicone tubing (Not included).  This is quite large, not the most common size used in home brewing.  This fitting is male meaning the threads are made to go inside the female.  You just put some pipe dope or tape in the threads and screw it in.    This 304 stainless adaptor is durable and easy to use.  It is solid and well built.  This barb should last you several lifetimes unless you are using it in salt water!  If you need a more normal size for 7/16, 1/2″, 5/16 or 3/8″, see our other items.

178 in stock

SKU: BARB_20mm_LARGE Category:

Description

  • Product Name: Male Hose Barb 1/2″ MPT, Design: Straight, National Pipe Thread
  • Easy to install, dependable 304 Stainless Steel
  • Dimension:  1/2″ Male Thread Pipe fitting to OD 20MM hose tail barb ID of fitting is 16mm
  • Maximum working pressure of 150 psi at 70 degrees F
  • Can be used to connect brewing equipment, air hose, gas hose, water hose, fuel hose, etc,

Additional information

Weight 2 oz
Dimensions 2 × 1 × 1 in

Reviews

There are no reviews yet.

Be the first to review “STRAIGHT HOSE BARB BARBED NIPPLE 1/2 Male NPT to 20mm (~7/8) Barb to fit ~3/4″ ID Tubing for Brew Kettle Ball Valve 304 Stainless”

Your email address will not be published. Required fields are marked *

*

You may also like…