Controlling temperature is vital for good fermentation, so use a 1/4″ Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe for accurate positioning and readings even deep inside the fermenting bucket. It keeps out contaminants and aeration and is compatible with standard glass carboys, temperature controllers, and airlocks. The thermowell is removable from the stopper to fit different sized configurations. The included #7 silicone stopper has an airlock hole to prevent your carboy from building up pressure. Dry the carboy surface and the stopper, place a probe inside the tube and then inside your beer fermentation vessel. The thermowell and stopper will stay secure once properly pressed into the carboy. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
MONITOR FERMENTATION: The 1/4″ Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe gives your temperature controller accurate readings to keep your beer at a precise temperature for sterile temperature control; Heating kit and carboy not included
KEEP OUT CONTAMINATION: Place a probe inside the tube and then inside your beer fermentation vessel (not included) to monitor your wort while keeping out harmful contaminants and aeration
USE YOUR CARBOY: Compatible with most standard glass carboys, temperature controllers, and airlocks; The thermowell is entirely removable from the stopper to fit different sized configurations (#10 stoppers are recommended for plastic carboys)
COMBINATION SET: In addition to the thermowell, the included #7 bung plug stopper has an airlock hole with a 0.25-inch (6mm) diameter for standard size airlock to prevent your carboy from building up pressure; The stopper has a 1.3-inch (33mm) top diameter and 0.9-inch (24mm) bottom diameter and includes all hardware needed for exact temperature control even in colder environments
SECURE FIT: Constructed with a stainless-steel tube and silicone bung stopper; Make sure the carboy surface and the stopper itself are dry in order for it to stay secure once pressed into carboy; Approximate 0.25-inch (6mm) tube inside diameter (ID); 15.5-inch (39.4cm) overall length; 14.25-inch (36.2cm) tube and 1.1-inch (2.8cm) stopper