Siphon Spray Wort Aerator or Sparging Arm Tip White

$5.00

Low cost solution to both aeration and sparging.  This sprayer is most commonly used to aerate wort while transferring to the primary fermenter.  Simply place this on the end of the siphon or transfer hose. When the wort hits the end it will either dribble gently or spray out depending on the pressure. The siphon sprayer can also be used for sparging on all-grain systems. Spraying the water over the grains will help prevent tunneling in your mash tun.

66 in stock

SKU: SIPHON_SPRAY_TIP Category:

Description

This does not provide a fine spray, it just ensures that the water is dribbled out so as not to form a hole in the grain bed while at the same time maintaining the level of water on the grain bed.  Saves on time and improves the quality of your all grain brewing.  If you are using a pump it may be necessary to clamp or zip tie the tip to the tubing.  Fits inside 3/8″ silicone hose or 7/16″ to 1/2″ Poly Tubing.  3/8″ hard plastic Rigid Tubing does not fit inside without sanding it down. 5/16 and 3/8 Poly Tubing is also said to fit inside it but our testings say not.  It fits those outside with some heating and stretch of the PVC tubing.

  • Fits inside all carboys and coolers.
  • Works well with gravity feed or pump.
  • Increase dissolved oxygen in your wort.
  • No need to rock or shake a heavy fermenter with this aerator/diffuser.

Additional information

Weight 1 oz
Dimensions 4 × 1 × 1 in
Brand

Color

EAN

EANList

ItemDimensions

Label

Manufacturer

MPN

PartNumber

ProductGroup

Publisher

Studio

UPC

UPCList

Reviews

There are no reviews yet.

Be the first to review “Siphon Spray Wort Aerator or Sparging Arm Tip White”

Your email address will not be published. Required fields are marked *

*