BREWER’S EDGE FERMENTATION / DISTILLATION LID for Anvil Foundry / Mash and Boil Electric Brewing Unit

$36.95

Use your Mash & Boil or Anvil Foundry 6.5 or 10.5 to distill alcohol. This distillation lid clamps right on in place of the original lid. Has a 47mm hole to accommodate any Turbo 500 or AlcoEngine bolt-on column. Will also work with 2″ Triclamp threaded bulkhead.  Does not fit the Grainfather.

This lid will fit virtually “any” pot, still etc with an “inner” diameter of not less than 12″ (inside of your pot lip) and an “outer” diameter (outside of your pot lip) of not more than12-13/16″. If your kettle is within these specs, like the Bayou Classic…it will fit.

10 in stock

Description

Use to ferment right in your Mash and Boil OR use your Mash and Boil as a still. Hole sized correctly to bolt on the T-500 or AlcoEngine columns and produce up to 95% pure grain alcohol.

  • FITS BREWERS EDGE MASH AND BOIL
  • FITS ANVIL FOUNDRY
  • HOLE IS CORRECT SIZE FOR T-500 DISTILLATION COLUMN
  • HOLE ALSO FITS #10 RUBBER BUNG FOR AIRLOCK
  • STAINLESS STEEL
  • SILICONE GASKET INCLUDED

Additional information

Weight 16 oz
Dimensions 12 × 12 × 1 in
Brand

EAN

EANList

ProductGroup

UPC

UPCList

Reviews

There are no reviews yet.

Be the first to review “BREWER’S EDGE FERMENTATION / DISTILLATION LID for Anvil Foundry / Mash and Boil Electric Brewing Unit”

Your email address will not be published. Required fields are marked *

*

You may also like…