Description
- Unique Process: In counterflow chilling, hot wort flows from your boiler through the inner copper tube in one direction down to the fermenter while cooling water flows the opposite direction inside the red jacket.
-
Leak-Proof Construction: Features PEX tubing swaged and soldered directly to the copper wort pipe, replacing standard clamped connections.
-
Rapid Cooling: The counterflow design allows for single-pass cooling from boiling to pitching temperatures. When your wort reaches the bucket it will be at temp to pitch yeast.
-
Clog-Resistant: Offers a larger flow area than plate chillers, which helps prevent clogs from hop material.
-
Duotight Compatible: Works with 3/8 and 5/16 ID tubing and with 9.5mm Duotight fittings .
Enables a more efficient cold break to remove unwanted proteins and particles from your beer. Cleaner aroma profile because of decreased DMS production, giving you the more pronounced aroma that you worked so hard for.
Easier to clean especially when compared to the plate chillers. It will not trap hop particles like a plate chiller will. When chilling one thing you want to have is cold break. Cold break is the coagulation of proteins and other stuff floating in your wort. This coagulation contributes to clean appearance, reduction in chill haze, and a clean flavor in lagers.
Use 3/8 inch tubing barbs and hose clamps to connect the chiller to your wort in and out feeds (not included). The water connections are the same. The chiller measures around 10 x 10 x 10
Additional Parts Needed be scrounged and not included: Depends on your installation. Kitchen faucet to hose adaptor, Female Hose barb, 3/8″ poly tubing from sink to chiller and then to drain, 3/8″ High Temp Tubing from kettle to chiller and then to fermenter, 3/8″ hose clamps.
Reviews
There are no reviews yet.