DUAL GAUGE PRIMARY REGULATOR For Economical CO2 Gas Dispensing of Soda and Beer

$50.00

Here’s a heavy duty double gauge professional grade Co2 Regulator from BrewCraft USA.  This is a completely standard unit – you can be assured it can be set up to work with any kind of CO2 setup.  This regulator features a convenient knob style pressure dial that can be adjusted without tools. You will just need an adjustable wrench to tighten the lock-down nut.  You can feel the heft of this unit at almost three pounds and if your Co2 tank is correctly chained to the wall it should last you a very long time.  Has a check valve to prevent beverage backflow into the regulator.

5 in stock

SKU: ECONOMY_REGULATOR Category:

Description

This regulator has the dual gauges for high side and low side.  You have one dial that shows the pressure going to your keg and one dial that shows remaining pressure in the tank.  It is important to set the pressure in your keg correctly for the style of beer you are dispensing.  You also need to know how much pressure is left in your Co2 tank so that you are not let down during an important party!  Connection to the tank is sealed with an ultra durable nylon gasket.  This regulator has a barbed output allowing you connect a variety of gas line types easily. There is a shutoff valve so you can relieve the pressure and easily switch kegs and tanks.

  • Heavy duty construction
  • Heavy duty dual gauges
  • Big body for less pressure fluctuation
  • Large adjustment knob with lock ring, no tool required
  • Shut-off valve has a check valve built in that prevents beer back-up into the regulator
  • Outlet barb sized for use with 5/16” ID gas hose
  • Regulator has a pressure safety system with blow off at 55 to 60 PSI
  • Permanent seal at the inlet nipple provides enhanced protection of leaks
  • Eliminates the need for fiber washers upon refill.

Additional information

Weight 49 oz
Dimensions 5 × 6 × 6 in
Binding

Brand

Label

Manufacturer

Model

MPN

NumberOfItems

PackageQuantity

PartNumber

ProductGroup

Publisher

ReleaseDate

Studio

Reviews

There are no reviews yet.

Be the first to review “DUAL GAUGE PRIMARY REGULATOR For Economical CO2 Gas Dispensing of Soda and Beer”

Your email address will not be published. Required fields are marked *

*

You may also like…