MiniMax COOLSTIX Cooling Solution for BrewBuilt™ X1 Uni Conical Fermenter 7 AND 14 Gallon 1.5″ TriClamp Water or Glycol – Special Order – FREE SHIPPING

$79.99

The CoolStix MiniMax offers an easy-to-use, innovative solution for maintaining fermentation temperatures.  The CoolStix is a revolutionary cooling solution for 7 to 14 gallon conical fermenters with 1.5″ tri-clamp fittings. It is easy to clean, easy to setup, and cools fermentations quickly and efficiently.  Fits perfectly with the Pressure Pack’s 1.5″ T.C. port.  This is for the bare CoolStix shown.  The main additional items you will need are a pump and a temperature controller.  We suggest the Anvil brand, available on this web site.

NOTE:  Due to current high demand for BrewBuilt™ products and hard to get materials and labor, this unit is built to order. There is usually a two week lead time and the item will ship directly to your when ready.  Fits perfectly with the Pressure Pack’s 1.5″ T.C. port, or you can replace the Uni’s 4″ T.C. port with a 4″ to 1.5″ T.C. reducer. Cycle cooling solution through the CoolStix using either a Glycol Chiller or pump through a wort chiller in ice water.

 

Available on backorder

SKU: DS_GLY530 Category:

Description

  • Diameter – 1″
  • Overall Length – 22 1/4″
  • Bottom of CoolStix to T.C. Fitting – 20″
  • Width from CoolStix to Barb – 6½”
  • Made from polished 304 Stainless Steel GLY530

You Will Also Need:

  • Submersible Pump
  • Temperature Controller
  • 3/8″ ID Tubing
  • Ice Bath or Glycol Chiller
  • 1.5″ Tri-Clamp & Gasket

X1 Uni Generally Available Upgrades:  The base model X1 Uni has the most affordable price point with the option to add upgrades down the road. All of the accessories included with the X1 Uni+ can be purchased separately at any time.

  • Flex Chamber – Trub Separator & Yeast Harvester
    The  attaches directly to the dump valve and can be used for dropping trub, harvesting yeast, and many other tasks. Ball lock adapters can be attached to the threaded ports on either side, allowing for oxygenation or carbonation stones to be connected. Or flush the pressurizable Flex Chamber with CO2 and use it to inject hops and other additions into the fermenter.
  • Pressure Pack with Clear Float Technology
    The Pressure Pack features our unique floating racking tube that can be used for taking samples, keg transfers, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.
  • Glycol-ready X1 CoolStix™ MiniMax
    The offers an easy-to-use, innovative solution for maintaining fermentation temps. Fits perfectly with the Pressure Pack’s 1.5″ T.C. port, or you can replace the Uni’s 4″ T.C. port with a 4″ to 1.5″ T.C. reducer. Cycle cooling solution through the CoolStix using either an IceMaster Glycol Chiller or a  placed in ice water.
  • Pressure Fermentation Kit
    Ferment under pressure with this two-piece Pressure Fermentation Kit that includes a Ball Lock Spunding Valve and a professional 1 BAR tri-clamp PRV. The spunding valve features a 0-15 psi pressure gauge and a hand adjustable blowoff to dial in your desired pressure setting. The pro PRV provides added safety when fermenting extra-large or high gravity batches where krausen may reach the lid of the fermenter. Fermenting under pressure will reduce esters and fusel alcohol production, and enable you to ferment lagers at ale fermentation temperatures. Not to mention your beer is already carbonated when it’s finished fermenting!
  • Rolling Caster Set
    Easily move the conical around the brewery by adding the . Even an empty fermenter can be taxing on one’s back when lifted or carried. Use these to roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort.

Additional information

Weight 16 oz
Dimensions 24 × 6 × 6 in
Binding

Brand

Color

EAN

EANList

ItemDimensions

Label

Manufacturer

Model

MPN

NumberOfItems

PackageQuantity

PartNumber

ProductGroup

Publisher

Size

Studio

UPC

UPCList

Reviews

There are no reviews yet.

Be the first to review “MiniMax COOLSTIX Cooling Solution for BrewBuilt™ X1 Uni Conical Fermenter 7 AND 14 Gallon 1.5″ TriClamp Water or Glycol – Special Order – FREE SHIPPING”

Your email address will not be published. Required fields are marked *

*