PIGTAIL 110V to 220V PLUG Adapter Cord 12AWG Dogbone Voltage Plug Converter Cable for 220V Anvil Foundry, Digiboil, TIG, MIG up to 50amp

$29.95

Here’s the missing link, the ‘pigtail’ or ‘dog bone’ converter required to run the Blichmann Foundry 10.5 Gal or 65L 220 volt Digiboil at 220 volts.  The Foundry and Digiboil both come with a standard 110v three prong plug, but you can flip the switch over to 220, attach this cord, and plug it directly in to a 220v plug.  It will heat up twice as fast.  Does not step voltage.  Also compatible with most welders on market such as: Millermatic, Lincoln Power MIG series, Hobart Handler, Ironman, Betamig and Century up to 50 amps.  Do NOT plug your single voltage 110v coffeepot, toaster, or electric blanket into this.

Out of stock

Add to Wishlist
SKU: PIGTAIL_110V_220V Categories: , , ,

Description

  • Please note that what this adapter does is allow a 110v plug to be connected to a 50 amp 220v receptacle.  It does not step the voltage up or down.
  • This device only changes your 110v Plug to a 220V plug without rewiring or replace plug.
  • Saying it again:  Does NOT step voltage up or down.  Be sure your device requires 220V
  • Professional welder extension cord, heavy material for longer service time
  • Wide operating temperate range ： 150 ℃
  • Perfect for indoor and limited outdoor use.  Resistant but not impervious to rain or splash water
  • Made in China, but seems to be excellent quality
  • Meets or exceeds all UL requirements and Test Certified E313867

Additional information

Weight 12 oz
Dimensions 10 × 9 × 3 in

Reviews

There are no reviews yet.

Be the first to review “PIGTAIL 110V to 220V PLUG Adapter Cord 12AWG Dogbone Voltage Plug Converter Cable for 220V Anvil Foundry, Digiboil, TIG, MIG up to 50amp”

Your email address will not be published. Required fields are marked *

CAPTCHA

*

Related products