MINI AUTOSIPHON KIT 3/8″ RACKING CANE w/Hose and Clamp for Gallon Jugs and 2-Gal Fermenters Auto Siphon Starts Easy with a Couple Pumps

$12.00

This is a complete MINI AUTOSIPHON Kit for 1 Gallon Jugs and 2 Gallon Fermenters.  This 3/8″ siphon kit includes everything you need to rack your beverage and you won’t need to order anything else except maybe the 3/8″ bottle filler.  No need to struggle getting a siphon started.  No fussing around making sure the tubing and clamp fit, Charlie has done all that so this will be easy for you.  Includes the Mini Auto Siphon, the 5′ of 5/16 hose, and even the autosiphon clamp.  You get everything shown except the carboy full of homebrew!

8 in stock

SKU: MINI_AUTOSIPHON_KIT Categories: ,

Description

A 3/8 inch siphon is not hard to start without the auto-siphon.  The Autosiphon makes it way easy and it is more sanitary.  Instead of trying to suck the chrome off a trailer hitch just slip it in and give a couple pumps!  
Easy to use stroke action starts a siphon without disturbing sediment. Go ahead and get your carboy or bucket wedged.  Start the siphon then carefully slide it down the clamp to the bottom.  Precision designed for smooth leak-free operation and durability.  Simple to sanitize and the removable tip prevents siphoning of sediment..

The Autosiphon is 13″ long so it will go to the bottom of a 12″ tall fermenter, like a one gallon jug or a 2 gallon bucket.  In a pinch it is possible to start your siphon and then slowly extend the pump arm all the way out while going down with the siphon body, giving you an additional few inches of depth.

Instructions (Courtesy Our Vendor):

    • Sanitize and rinse your Auto Siphon.
    • Get the inner tube gasket and the outer tube wet.
    • Attach the curved siphon to a hose.
    • Submerge the end of Auto Siphon into your container.
    • If bottling directly, attach the bottling wand and place it inside a bottle.
    • Otherwise place the the tubing into the container you’re racking to.
    • Pull the inner tube up until the liquid fills the tube.
    • Pump the inner tube down and siphon will begin.
    • Pull out the inner tube and sanitize your Auto Siphon for storage.

IMPORTANT:  DO NOT REMOVE the flutter valve at the tip of the device.  It will be difficult to reinstall without a piece of dowel and poster putty.  I’ll never take another one out.  Rinse it well and sanitize in place.

 

Additional information

Weight 12 oz
Dimensions 20 × 4 × 4 in

Reviews

There are no reviews yet.

Be the first to review “MINI AUTOSIPHON KIT 3/8″ RACKING CANE w/Hose and Clamp for Gallon Jugs and 2-Gal Fermenters Auto Siphon Starts Easy with a Couple Pumps”

Your email address will not be published. Required fields are marked *

*