KETTLE THERM KIT 3″ DIAL THERMOMETER WITH WELDLESS BULKHEAD KIT – BREWER’S BEST BRAND NAME STANDARD DUAL SCALE SETUP

Amazon.com Price: $19.95 (as of 24/11/2018 00:12 PST- Details)

Here’s a high quality “Brewers Best” dial thermometer with the stainless 1/2 NPT thread back connection to screw right into the bulkhead of your brew kettle or still.  This unit includes a built in thermowell and weldless bulkhead!  All you need it the right size hole in your kettle.  If you will be drilling a hole in stainless or other material be sure to review the videos on UTube, wear adequate protective gear, and use lots of oil while drilling.  With this thermometer you will be able to accurately measure the temperature of your brew.  Any parts that could possibly touch your homebrew are all stainless steel not brass not chromed or nickle plated brass, STAINLESS STEEL so you are assured of purity. 
The huge 3.5″ inch dial face is bright and easy to read with clear 2° temperature graduations and crisply printed numbers so you can take readings at a glance. Displays Fahrenheit 0 to 220 and Celsius -10 to 10 with an accuracy within 2 degrees.
SKU: KETTLE_THERM_WITH_MOUNTING_KIT Category:

Description

If you’re looking for a way to read the temperature of your brew pot, look no further. The Brewer’s Best Dial Thermometer can easily monitor the temperature of your boiling brew kettle at a glance. No more opening pot lids and dripping hot wort spilled to check the wort or mash temperatures anymore.  This thermometer features a 3″ dial, a 4″ probe and a calibration screw. The 4″ probe is deep enough for an accurate reading, yet not too long so it interferes with your mash paddle very much. Perfect for a mash tun or a brew pot. If your pot has a 1/2″ female NPT coupling already installed it will screw right in or if it just has a hole the nut and o-ring are included to make a tight seal.  Be sure to use pipe tape where the nut will end up.

Features:
Material is 304 Stainless Steel
Adjustment screw for fine-tuning
Seals are all high temp silicone
Size: 3″ gauge face, 4″ probe length, 1/2″ NPT thread
Temperature shows: 0-220ºF and -10-100ºC
Perfect for home brew kettles, stock pots, mash tuns
Using boiling water and submersing the probe is the best way to ensure it has an accurate reading.
Altitude will effect the boiling temp but should not effect the way the thermometer reads.

Package Includes
1 x Brew Thermometer
2 x Silicone O Ring
1 x Stainless Steel 304 Washer
1 x Stainless Steel 304 Lock Nut

Tips:
1.  It needs 1 minute begin to test the temperature after put the thermometer into the water
2.  Water or liquids needs to cover the stainless flat washer that can test the accurate temperature.
3.  To prevent leaking, wrap the 1/2″ threads with 6-8 turns of Teflon pipe tape prior to threading into the port.

Summary of Features and Benefits:
★  3” LARGE GLASS FACE – Easy to read , shows increments in both Fahrenheit and Celsius, 0-220ºF and -10-100ºC
★  Designed with 1/2″ NPT threads for use with brew pots using standard 1/2″ bulkheads
★  4″ PROBE – The thermometer can be used with or without the thermowell
★  NO MORE OPENING LIDS -It allows you to easily monitor the temperature of your boil from the bulkhead
★  100% 90 DAY MONEY BACK GUARANTEE – If you are not satisfied for any reason, simply return the products for a full refund, no questions asked.

Additional information

Weight6 oz
Dimensions6 × 6 × 6 in
Brand

Size

PackageQuantity

ProductGroup

Warranty

Reviews

There are no reviews yet.

Be the first to review “KETTLE THERM KIT 3″ DIAL THERMOMETER WITH WELDLESS BULKHEAD KIT – BREWER’S BEST BRAND NAME STANDARD DUAL SCALE SETUP”

Your email address will not be published. Required fields are marked *

*